Year: 2015

Re-Tooling

by

Cutting Edges & Re-Tooling

BCB Loader

Your loaders are finally taking some time off, with their downtime it is the perfect opportunity to tune them up and make  sure they are 100% prepared and ready for when they are needed. Some of the items you may be looking into include such things as all your loader bucket edges needs that are available for all custom or for standard designs. Weld on base edges, straight and spade nose, bolt-on edges and segments, wrap around edges, weld-on corners, bolt-on and weld-on wear plates, half arrow edges with or without holes, and more.
Follow this link to view more info: Click Here

The Gatorback Bit

by

AmCana – Gatorback Bit

The Gatorback from AmCana is ideal for environmental, water wells, mining and geothermal drilling. It is perfect for soft-medium and soft only formation such as overburden, shale, sand, tills and clay. The Gatorback bit runs most efficiently at a slow or medium speed which is beneficial to drilling equipment as it results in less stress and strain on the machine.  The bits have a longer lifespan than the conventional bits, which also do not require any lubrication in order to keep working as there are no bearings in the bit; with no moving parts it is less likely to leave clutter and pieces in the hole.

Gatorback Bit
Gatorback Bit top-view

Bruxite - Hard n Tuff

by

Bruxite

Maximum wear time, optimal protection, hard steel that works for you! Olofsfors edge steel and wear bars are tools of guaranteed quality; manufactured by the same high-strength boron steel that Olofsfors is known for.
Bruxite is offered in a wide array of different products sold and distributed by CRD. It has excellent weld-ability properties, and has systematic quality control ensuring quality hard and tough material from one edge to the other for maximum wear time.

Cutting Edges

Straight edge steel that is available in any number of dimensions in Bruxite 500 which is used to reduce front lip wear protection. This then results in a lighter and sharper bucket leading to higher productivity. Bruxite 500 is now offered that is released in two different strengths, under 2” is 500 Hbr, and over 2” is 440 Hbr.

 

Wear blocks

The new Bruxite Wear Blocks offer all these terrific benefits.

Grouser Bars

Available in 7 different profiles, the combination of hardness, toughness and weldability offer excellent value for money for many different abrasive applications.

 

Half arrow edges

Offered in 5 sizes, the half arrow edges are most commonly used as front edges on loader buckets and also side edge protectors between teeth and bucket. Protecting the cutting edge and underside of the bucket, the half arrow edge is a cost efficient solution for extra wear protection and a way to repair a worn cutting edge off of a used bucket.

Bruxite Wear Blocks

Plowing Away

by

T'is The Season

Huge Variety Of Snow Products Ranging From Black Cat Blades – Joma 6000, SnoShock, Or Olofsfors– SharqEdges And Kennametals – I.C.E. Blades

black cat snow plow pushing snow on a truck
black cat joma 6000

With the winter season upon us once again it is a good idea to be prepared for the snow to hit the ground. Creighton Rock Drill offers a lineup of unique snow plow systems for any road condition.

With a huge variety of snow products ranging from the Black Cat Blades’ ‘Joma 6000’, ‘SnoShock’, or Olofsfors’ ‘SharqEdges’ and Kennametals’ ‘I.C.E.’ blades. We also offer a full lineup of generic

road maintenance products from Black Cat Blades for grader or plow blades in carbon, heat-treated or with carbide.

CRD has a solution for any grading or plowing conditions you need, view our lineup here and learn more about what system best suits you.

For More Info About Product : Click Here

Hard-core Tools

Hard-core Tools

by

O.T Brand Hard Core Tool

Hard Core Tool Split
TOOL WITH AN EXTRA HARD CORE ROD

-O.T Brand’s line of hard core tools join Creighton Rock Drill’s product lineup this season that is available for Atlas Copco, BTI, Toku, NPK Breakers and more!

-This tools quality of material is ensured through its integration of tough material which is resistant to breaking that also has an extra steel core at the working end of the tool that is 58-60 Rockwell.

-Wear and tear is also reduced through heat-resistance materials that also will allow the chisel to keep its original shape, resulting in higher efficiency due to less down time for tool changes.

  • Exceeding Durability
  • Exceeding Tenacity
  • Exceeding Heat-Resistance
  • High Efficiency

Hartl Crusher Attachments

by

HARTL Crusher Lineup

HARTL Crusher, Screener And HSP Screen Plant

Hartl Crusher screener graphic

The addition of HARTL CRUSHER’s crusher, screener and HSP screen plant add to Creighton’s already vast attachment catalogue that can serve all of your attachment needs.
The HARTL CRUSHER lineup is a flexible and mobile product range that can process and recycle materials economically and on site, with minimal space and time.
Some of the applications include processing a wide variety of materials such as natural rock from quarries, mines, etc. and spoil (concrete, tiles, asphalt etc.).
The CRUSHER can also be used for recycling purposes like concrete posts and railway sleepers, and can also be used for roadwork and leveling, excavations and forestry roads.

For More Info of Product: Click Here

CRD Sudbury

by

New CRD Sudbury Location

Sudbury Branch Front

Creighton Rock Drill Ltd is proud to announce the opening of our new branch in Sudbury, Ontario! As CRD continues to expand and increase their presence in Northern Ontario.

Sudbury was a logical choice in that it is the mining capital of North America. The shop is located at 60A Magil St., Lively, ON, and can be reached at 705-910-0123.

Just in time for winter, Sudbury will have a selection of snow plow blades of different makes and types as well as maintaining a wide array of different products from GET to breaker service. MTG will be in abundance in different styles and sizes of teeth as well as adapters.

Drilling will also be well stocked with a number of down the hole (DTH) hammers as well as a bit grinder on site to get your dull bits back in working order. There is a DTH repair bench for hammer repairs set up in the new Sudbury branch that includes BTI breakers and services available.

Sudbury CRD Map

Address : Walden Industrial Park, 60 Magill St, Lively, ON P3Y 1K7
Phone : +1(705) 806-0123

May News

by

SPRING TIME DIGGING

Creighton Rock Drill Is Not Just In The Business Of Selling Hydraulic Hammers, We Are Also In The Business Of Repairing, And Making Sure The One You Have Runs Smoothly And As Efficiently As Possible.

Hydraulic Oil

Greenland Hydraulic Oil

Hydraulic oil is essential for any and all hydraulic applications which can include; excavators, backhoes, hydraulic breakers, industrial machinery and power steering systems to name a few. The function of the oil is used to create power, however there are a number of other equally important functions. The oil is used to transfer the heat created from the machine and sends it through the oil as opposed to being transferred through the machine parts themselves causing them to heat up leading to premature damage and wear. The oil is similarly used to create a seal in the hydraulic piston improving pump efficiency.

Hydraulic oil has changed greatly from it’s beginnings in ancient Egypt where only water was used. Mineral oil replaced water as it was more effective due to its innate lubrication properties. With the changing in recent times and the paradigm change to a more environmentally safe and sustainable future, Creighton Rock Drill Ltd has partnered with Greenland Products. An industry leader in this change towards a sustainable future, Greenland’s hydraulic fluids are environmentally safe hydraulic oils that are an effective alternative to petroleum based oils.

Greenland Products

Greenland is committed to a healthier, safer environment, without sacrificing performance. They achieve this and more with their product as the vegetable oil-based lubricants operate at lower temperatures, as well as have a high viscosity and stability that in turn reduces downtime, increases productivity, and increases the life of the machine itself. Made from renewable resources, the lubricant is biodegradable and non toxic to the environment and is safe for the workers who use it.

Hydraulic Repairs & Rentals

Creighton Rock drill is growing a reliable service and rental division. Servicing, repairing, or replacing parts we offer it all, we service ALL makes of hydraulic breakers as well as drilling equipment in-house. Just a SMALL list of the breaker brands we work on include: Atlas Copco, BTI, MPK, Allied, Rammer, CAT, Arrowhead, Bobcat, Tramac, and the list goes on! We similarly have all sizes of breakers available for rent, just give us a call for more information!

Our All Makes Repair Service Compliments Our All Make Tool Steel Program. If You Have A Hydraulic Breaker We Will Have Or Will Get The Tool Steel Point, Chisel, Or Blunts In Stock For You.
3 models of the Atlas Copco Hydraulic Breakers

 

 

 

 

 

Creighton Rock drill is growing a reliable service and rental division. Servicing, repairing, or replacing parts we offer it all, we service ALL makes of hydraulic breakers as well as drilling equipment in-house. Just a SMALL list of the breaker brands we work on include: Atlas Copco, BTI, MPK, Allied, Rammer, CAT, Arrowhead, Bobcat, Tramac, and the list goes on! We similarly have all sizes of breakers available for rent, just give us a call for more information!

Our all makes repair service compliments our all make tool steel program. If you have a hydraulic breaker we will have or will get the tool steel point, chisel, or blunts in stock for you.

 

Atlas Copco S M H Breakers