Combi Wear Parts is a long-standing brand offered by CRD, which has proved itself time and time again. Combi Wear Parts are made in Sweden in their own foundries so the quality of these teeth is world-class. This side pin system looks different from any other tooth in the world. The system is made to be very efficient leaving very minimal throwaway. The positioning of the pin and the shape of the pocket make this system very secure as well as easy to change.
Combi Wear Parts Teeth
COMBI parts® is an integrated system of earthmoving tools for excavators and loaders. The system is both innovative and well-proven. Its outstanding success is largely due to the unique coupling geometry. Simplicity, user-friendliness, and cost-efficiency are amongst the goals set for all our designs. Combi wear parts are available through a large number of specially selected Combi partners.
The COMBI Parts® System
- Is the market leader in wear ratio – longer tooth life reduces downtime.
- Uses high-strength, low-profile components – weight savings increase efficiency.
- Has a wide range of adapters and teeth – maximum versatility and optimum penetration.
- Offers a large choice of shroud combinations – prolonged bucket life reduces costs.
- Is a total solution – puts both the user and the environment in focus.
- Comes with a warranty against breakage and tooth loss.
Designs
For Excavators
- T35 – Maximum penetration from a conventionally shaped tooth – perfect for general excavation.
- T5 – Good penetration and excellent wear resistance from a traditional, chisel-shaped tooth. Widely used for general excavation in tough conditions.
- T50 – A tooth that combines good penetration with excellent wear resistance. Ideal for general excavation in tough conditions.
- T58 – Self-sharpening tooth with outstanding wear resistance – particularly suitable for quarries that present highly abrasive ground conditions.
- T45 – An extra-wide tooth for excavating and cleaning — penetration and straight-edge performance from a single solution.
- T7 – The tooth for maximum penetration. Makes light work of hard surface layers and frozen ground.
- T6 – Converts a bucket with teeth into a straight-edged cleaning bucket. Ideal for back filling and cleaning.
- T25 – Used primarily in a corner position in combination with T7, this tooth provides the penetration demanded by hard surfaces.
- T8 – Maximum wear resistance in highly abrasive ground – particularly suitable where extra wear material is a top priority.
For Loaders
- T1 – Good penetration and excellent wear resistance from a traditional, chisel-shaped tooth. Widely used for work in everything from general to highly abrasive ground conditions.
- T2 – A tooth with added wear material on the underside – ideal when the lower part of the adapter needs extra protection.
- T3 – A general-purpose tooth that, compared to T1, has a wider tip and more wear material on the sides. Suitable for abrasive ground conditions.
- T29 – In both general and highly abrasive environments.
This all-around tooth is popular for its excellent penetration. - T48 – Outstanding wear resistance combined with a high level of penetration. This tooth provides extra protection for the lower part of the adapter and is ideal where ground conditions are highly abrasive.
- T8 – Maximum wear resistance in highly abrasive ground – particularly suitable where extra wear material is a top priority.
- T4 – Designed for use in abrasive ground, this tooth withstands high impact loads.
- T9 – Penetration tooth with extra wear material on the underside.