Mincon Spiral Flush

CRD — Mon, 28 Aug 2017 15:24:20 +0000

Mincon has been developing down the hole hammer tools for 40 years now with work site experience across all continents! They continue to strive with their world class testing and development partners that has allowed them to create new innovations and be at the forefront of the latest manufacturing technology.

Down The Hole Hammer

DTH drills a straight pile into any ground including bed rock. The depths can reach over 100 m covering from 89 mm diameter to over 1500 mm at any angle required.

Mincon Taking DTH Drilling To The Next Level

The new Spiral Flush product range has a redesigned face of the drilling bit as to have a flushing arrangement crosswise to the drilling direction.

This allows the air flow to be controller and prevent over drilling as well as air escape. This allows for DTH drilling to be taken to more urban areas and harbor construction without disturbing the environment surrounding it.

Mincon has been able to not only control the flushing of DTH drilling, but also improved the productivity of the bits at the same time.

EFFICIENT

Flushing improves drilling speed
Enhanced drilling speed enhances pilot bit life
Cutting edges improve drilling in hard clay
Spiral grooves push material out when rotating

ENVIRONMENTAL

All cuttings and flushing air are kept inside of the casing – no air escapes to the surroundings
Removes danger of over drilling (within sandy formations)
Removes danger of air escape (within clay formations)

INCREASED SIZE RANGE

Mincon has developed the most powerful DTH hammer
The most reliable large diameter HD shock absorbers
Manufacture the biggest DTH bits ever made

The post Mincon Spiral Flush appeared first on Creighton Rock Drill Ltd..

Mincon MQ Hammer Range

CRD — Fri, 29 Jan 2016 19:02:14 +0000

MQ Hammer Range

Mincon has launched their newest down the hole hammer (DTH) range and it was put through extensive testing over the past year. The range consists of high performance DTH hammers that run standard shanks while also removing the foot valve which from a design standpoint was the weakest part of any DTH bit.

Not only did the engineers remove the foot valve but they were able to optimize energy use by doing so, resulting in a performance boost over the other models. The lack of foot valve and the optimized air flow and efficient exhaust allows the MQ range to drill more efficiently when water is encountered in the bore hole.

See all of our Mincon products here.

The post Mincon MQ Hammer Range appeared first on Creighton Rock Drill Ltd..