Atlas Copco



Feathers Wedges

Gas, Hydraulic & Pneumatic Handheld Tools


Freedom Of Movement, Zero Set-Up Time

With no compressors, hoses or cables to set up, gas breakers are ideal for smaller jobs. They are indispensable for tasks that involve moving along a line, from position to position. Or for working in remote, inaccessible locations. And for many years, they have been a standard piece of equipment for emergency teams.

But the Cobra Combi is not only a self-contained breaker, it’s a powerful drill as well. It can sink holes to the depth of 6.5 ft., and drill up to 12 inches per minute in solid granite.

A Multi-Purpose Tool

With a range of 18 different tools, you can use the cobra combi for everything from cutting and breaking, to drilling, driving, and compacting.

So whether you need to just break a small patch of concrete, or split a rock, you can get the job finished with a gas-powered machine in the same time it takes to set up a compressor and hoses.

Cleaner Emissions, Lower Vibrations, Less Noise

Multiple Uses To

  • break concrete
  • cut asphalt
  • drill
  • dig
  • split rocks
  • drive posts and fences
  • drive rods and spikes
  • tamp and compact soil
  • tamp ballast/ties

Vibration-Dampening Handles

New vibration-dampening handles have reduced vibration levels from 8 to 5 m/s2.

Easy To Start

With a new choke control, new carburetor and user-friendly instructions, the Cobra Combi is easy to start.

Easy To Transport

The Cobra Combi weighs just 55 lbs. It comes with its own carrying case which fits easily into the trunk of your car.

Combi Multi Breaker

Cobra Combi

Atlas Copco Pionjar Drill Breaker


High Performance solutions

The Pionjar has an enviable record for delivering low-cost, high performance breaking and drilling solutions. This gas tool easily breaks up asphalt and concrete and can even restore the working surface by compacting sand, rubble and stone after digging and breaking. The Pionjar is ideal for tie tamping, drilling, anchoring, concrete cutting, post-driving, splitting large boulders and more. Easy to transport in its protective wooden case, the Pionjar is quick to set up on location. All of the controls are together for easy operation. Ignition is simple with just a quick pull to the start cord. Users also appreciate the Pionjar’s soft grip handles for extra comfort and its service friendly reputation.

  • Breaking, cutting and drilling capabilities
  • Gas driven – no need for cables, power packs, hoses, or compressors
  • Easy to use, maintain and service
  • Cuts capital, running, transport and storage costs
  • Powered by a single-cylinder air-cooled two-stroke engine
  • Drills at a rate of 10-12 in./min. with a 1.3 in. bit
  • Weighs 59 lbs., making it easy to transport
* Also available: Non-Detergent SAE 40 Pionjar Oil! *
Pionjar Drill Breaker

Pionjar 120/130

Pionjar Oil

Pionjar Oil

Atlas Copco Pneumatic Tools


Ergonomic Breakers

The highly efficient silencing and vibration dampening systems make TEX PE machines comfortable to operate and the most productive choice for demanding jobs. The built-in ergonomic features of the machines means they can be used for prolonged periods with minimum risk to the operator’s health.

Standard Breakers

Simple and sturdy in design, the breakers in the TEX PS series are the most basic in the Atlas Copco breaker range. The Integrated polyurethane silencer reduces noise levels by up to 8 db(A). The long piston head gives better guidance in the cylinder and reduces wear on both parts.

Pick Hammers

Low weight, high productivity is the essence of all Atlas Copco pick hammers. A wide variety of models, with two types of D-handles and either kick-latch or cap-type tool retainers means there is always an optimal machine for the job at hand.

Chipping Hammers

The TEX 3 and 05 are the ideal choice for a wide variety of lighter scaling and chipping jobs: Roughening surfaces, hole making, chasing and trimming various materials – you name it these machines deliver!

Ergonomic Rock Drills

Atlas Copcos ergonomically designed rock drills are as good as they get. Light weight and comfortable to use, thanks to the vibration dampened handles and silencers, the BBD 15E and RH 572E are well proven productivity boosters.

The BBD 15E is specially designed for drilling in soft and medium hard materials, which require a high-capacity drill which is light and easy to move.

The RH 572E with slower rotation speed and higher impact energy is ideal for drilling in hard rock.

Medium Weight Rock Drills

The RH rock drills are designed for bench drilling, secondary drilling and drilling for smoth blasting. The small size makes them ideal for work in confined spaces.

Because it’s light weight the RH 571 is best suited for smaller jobs. The RH 658 is slightly heavier and and more powerful and can handle greater depths.

Light Weight Rock Drills

Equipped with either a T- or a D-handle the Atlas Copco BBD rock drills are suited for a number different tasks. With a D-handle it’s ideal for horizontal rock drilling, plug hole drilling and drilling in concrete. The T-handle models are best suited for vertical work such as concrete drilling, plug drilling, drilling for smoth blasting and seam drilling.


Atlas Copco Air Compressors


Atlas Copco’s Portable Compressors series offer exceptional reliability and efficiency. These versatile units are designed to operate in a wide range of applications.
Their unique modular build/design will meet and exceed your job site needs. All units are power packed with features and benefits that make them #1 world wide.

Atlas Copco Air Compressors

Atlas Copco Air Compressors