Atlas Copco Resources

Atlas Copco also offers a line of other hydraulic handheld tools that includes cut-off saws, core drills, water pumps, post pullers, ground rod drivers, post drivers, and some accessories.

Other Handheld Hydraulic Tools

HANDHELD CUT-OFF SAWS

HANDHELD CUT-OFF SAWS

These powerful, light and compact saws can be used to cut through concrete, asphalt and steel. Their simple hydraulic design with direct drive reduces maintenance, especially in comparison with belt-driven saws. They are easy to use thanks to the open cutting face, even under the most demanding conditions. With a lightweight cart you can use the saws for floor, road and other light surface jobs.

HANDHELD CORE DRILLS

HANDHELD CORE DRILLS

These powerful drills are ideal for jobs where there is no space for drill stands. Due to the non-kick back operation, you can still drill holes of up to 200 mm (8 in) in diameter free hand. Fully hydraulic, the tools can be used for wet diamond core drilling on the toughest jobs. The LCD core drill offers spark free operation – there are no electrical components – for safe operation inside buildings, in hazardous environments and even underwater.

HANDHELD WATER PUMPS

HANDHELD WATER PUMPS

Lightweight and compact submersible discharge pumps are used in a wide range of applications. These include continuous pumping of clean or contaminated water on building sites, in flooded excavations and cellars.

HANDHELD POST PULLER

HANDHELD POST PULLER

The post puller is used by road-maintenance contractors to repair barriers. With hardened jaws and automatic chain tightening clamp, the Atlas Copco post puller is ideal for removing all kinds of wooden or steel posts including IPE, HPE, and UPE profiles, plus round/square steel tubes. A built-in hand lever gives a total pulling force of up to 10 tonnes.

HANDHELD GROUND ROD DRIVES

HANDHELD GROUND ROD DRIVES

Well balanced and easy to use, these drivers come with a remote control operating valve. The ground rod drivers accommodate a wide range of driving requirements for earth connectors to depths of 2-3 metres (7-10 ft). When operated with an optional hose-mounted remotecontrolled valve, the drivers can be run with both open- or closed-centre systems.

HANDHELD POST DRIVERS

HANDHELD POST DRIVERS

Used for driving in road barrier tubes, profiles, signposts, fences and a wide range of anchors. The post drivers provide stable, powerful, high speed driving for a variety of post sizes. When operated with an optional hose-mounted remote-controlled valve, the drivers can be run with both open- or closed-centre systems

HANDHELD ACCESSORIES

HANDHELD
ACCESSORIES

Oil Flow Divider

The oil flow divider allows you to run tools from hydraulicpowered carriers by reducing flow and pressure. An extension hose is required to connect the divider to the tool.

Extension Hoses

By adding one or two 7 m (23 ft) extension hoses you can use up to 21 m (70 ft) of hose with no significant drop in pressure. The hoses are light and flexible and are fitted with flat-face, quick release couplings. (Extension hoses come as standard with LP 9-20 and LP 13-30 P).

For More Info Contact Us: